Showing all 14 results
Amber Color Beakers – Laboratory Glassware Equipment Amber Color Beakers with spout, accuracy of grad. ±5%. Our organization offers an excellent quality range of Amber Color Breakers to our respected clients. The offered bottle is manufactured from the finest quality glass material and advanced technology as per the international quality standards. This bottle is available in … Continue reading “Amber Color Beakers”
Objective To find the mass of the given body by sensibility method, using a beam balance. Theory The beam balance is a device used for the determination of the mass of a body under gravitation. It consists of a beam supported at the centre by an agate knife edge resting on a support moving inside a vertical … Continue reading “Beam Balance Experiment”
Centrifuge Tube Round Bottom – Scientific Laboratory Equipment Conical Bottom Centrifuge Tube: Simplify measurements using Conical-Bottom Centrifuge Tubes, which feature molded-in graduations. Translucent polypropylene co-polymer (PPCO) has excellent chemical resistance. These tubes can be autoclaved, however, repeated autoclaving in PC tubes reduces their mechanical strength. Particulars … Continue reading “Centrifuge Tube Round Bottom”
Conical Flask – Scientific Laboratory Equipment Conical Flasks are made up of polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the Conical Flasks contamination free and makes the flask leak proof. The threads of the Conical Flasks should be disengaged before autoclaving.
Dale Bath Apparatus – Pharmaceutical Equipment A Perspex organ bath with fine thermostatic temperature control, electronic stirrer and complete set of accessories, making it a versatile unit for all research work. Bath 9”×6”×8”, with leak proof dovetailed joints, resting in sturdy metal frame; top of the bath carries a 1”×3/8” hick band, for fixing accessories, … Continue reading “Dale Bath Apparatus”
Determine the resistance of a galvanometer by half deflection method and to find its figure of merit.
Figure of Merit of a galvanometer: Objective To determine the resistance of a galvanometer by half deflection method and to find its figure of merit. Theory Galvanometer A galvanometer is a device used to detect feeble electric currents in a circuit. It consists of a coil suspended between the poles at a competitive price of … Continue reading “Determine the resistance of a galvanometer by half deflection method and to find its figure of merit.”
Meter bridge- Law of combination of resistors Our Objective: To verify the laws of resistances in series and parallel. The Theory: Meter Bridge The metre bridge, consists of a one metre long wire of uniform cross sectional area, fixed on a wooden block. A scale is attached to the block. Two gaps are formed on it … Continue reading “Meter bridge- Law of combination of resistors”
Microprocessor Flame Photometer – Laboratory Equipment With Na & K Filter Upto 5 point calibration direct readout in ppm & meq/L, auto filter selection, auto gas cut auto ignition, large LCD Display 24×4 lines graphical through RS232 interface, single inspiration measurement results stored in memory 0 to 100% Sensitivity for full scale. Compressor & other … Continue reading “Microprocessor Flame Photometer”
Reagent Bottle (Narrow mouth) – Scientific Laboratory Equipment Material: Polypropylene Narrow Mouth Reagent Bottle:- Narrow Mouth Reagent Bottles made of Polypropylene. Bottles are Rigid, Translucent and have an Excellent Contact Clarity. The polypropylene cap has a built in seal ring to make these bottles leakproof. These can be autoclaved filled as well as empty. Feature: … Continue reading “Reagent Bottle (Narrow mouth)”
To draw the reverse characteristic curve of a Zener diode and to find its reverse breakdown voltage.
To draw the reverse characteristic curve of a Zener diode and to find its reverse breakdown voltage. Our Objective To draw the reverse characteristic curve of a Zener diode and to find its reverse breakdown voltage. The Theory: Zener diode A Zener diode is a heavily doped silicon crystal diode which allows current to flow … Continue reading “To draw the reverse characteristic curve of a Zener diode and to find its reverse breakdown voltage.”
Convex Mirror – Focal Length: The Theory: Convex mirror A convex mirror is a curved mirror in which the reflecting surface bulges towards the light source. Convex mirrors reflect light outwards; therefore they are not used to focus light. A convex mirror is also known as fish eye mirror or diverging mirror. The image formed … Continue reading “To find the focal length of a convex mirror using a convex lens.”
The Concave mirror – u-v method: Spherical mirrors It is a mirror which has the shape of a piece cut out of a spherical surface. Two types of spherical mirrors are; Concave mirror: Its inner concave surface reflects, and has polished outer surface. Convex mirror: Its outer convex surface reflects, and has polished inner surface. … Continue reading “To find the focal length of the given concave mirror by”
To study the variation in volume with pressure for a sample of air at constant temperature by plotting graphs between P and V, and between P and 1/V.
Boyle’s Law: Objective To study the variation in volume with pressure for a sample of air at constant temperature by plotting graphs between P and V, and between P and 1/V. Theory Properties of gases and Gas laws Gaseous state is a state of matter in which the substance does not have any specific shape … Continue reading “To study the variation in volume with pressure for a sample of air at constant temperature by plotting graphs between P and V, and between P and 1/V.”